-->>OPS Series OPS-SM6 8th/9th gen i3/i5/i7 CPU PC supportMXM nvidia gracphics card<<--
Power: 2*2PIN(12V/19V) or 12V/19V adaptor
I/O interface: DC_IN,2*2PIN,HDI,USB
HDI: 2*10PINUSB:
MF_USB3(USB3.0 header) or MUSB_B(USB3.0)
JUSB_1(USB2.0 header) or MUSB_A(USB2.0)
MPC_CTRL, FAN_Header, 1*MPWRBTN(Power On)
LINE_OUT,OPS_TV_CON header
OPS-LVDS card support HDI+LVDS
OPS-DP card support HDI+DP
-->>OPS Series OPS-H510G Core Comet 10th/Rocket Lake 11thgen LGA1200 i3/i5/i7 CPU PC<<--
H510G Intel Core Comet Lake 10th Rocket Lake 11th generationLGA1200 motherboad 80pin OPS interface USB 3.0 12/19VDC
For Industral application
Model No. H510G VER:1.0
Power supply interface:
Main board DC interface specification 5.5 * 2.5;
Mainboard power supply supports 12V or 19V; The full-load powerconsumption is about 110W, and it is recommended to use 12V10A or19V6A power supply;
Display interface:
1. Main board HD MI, main board DP, sub-card HD MI/sub-card DPsupport single display, double display copy, double displayexpansion, and double display under SHELL;
2. Select one of the sub-card HD MI and sub-card DP signals. Bydefault, HD MI is supported. If the sub-card DP is used, the boardneeds to be changed;
3. Sub-card HD MI interface supports 4K resolution 4096/3840*2160@60Hz ; (CPU is not distinguished)
4. Main board DP and sub-card DP support 4K resolution 4096/3840*2160@60Hz
5. When the CPU is the 11th generation i5/i7/i9, the HD MIinterface on the motherboard supports the 4K resolution of4096/3840* 2160@60Hz ; When the CPU is a 10-generation i3/i5/i7/i9,the HD MI interface on the motherboard supports a 4K resolution of4096/3840* 2160@30Hz ;
Mini-PCIE:
1. The Mini-PCIE interface on the motherboard defaults to PCIEsignal, no USB signal, supports WiFi by default, and can be changedto coexist with USB signal. After the change, USB3.0 is installedexternally_ 2. The USB3.0 interface at the bottom does not work.After the change, it supports WiFi/3G/4G/BT module;
2. The MSATA interface of the motherboard defaults to SATA signal,without USB signal, and supports MSATA disk by default. The SATAsignal can be changed to PCIE signal. After the change, M.2 onlysupports SATA signal, but does not support PCIE signal (NVMeprotocol);
M.2:
The motherboard M.2 interface supports M.2 2280 SSD by default,optional M.2 2242 SSD by default, SATA signal by default, and PCIEsignal (NVMe protocol) by default. The motherboard needs to bechanged. PCIE signal of M.2 and PCIE signal of MSATA can beselected;
USB interface:
1. The motherboard supports 6USB (3 * USB3.0, 3 * USB2.0) bydefault;
2. Main board external USB3.0_ 2 The top interface is USB2.0signal, USB3.0_ 2. The USB2.0 signal of the bottom interface andthe USB signal of the Mini-PCIE are optional. After the 4G/BT issupported, USB3.0_ 2 The USB interface at the bottom does notwork;
3. All USB interfaces on the motherboard are powered on by default(not powered off), only USB3.0_ 2 Power A can be changed (power onafter shutdown) Other USB interfaces cannot be changed;
COM port:
1. Main board COM1/2 supports RS232 by default; The ninth pinoutput 0V/5V/12V can be set through JPCOM1/2/jump cap respectively,and the default is 0V;
2. The main board COM2 and the daughter card TTL are the samesignal, and there is no need to change the hardware;
network card:
The motherboard supports Realtek 8111H gigabit network card, whichcannot be changed to dual network or POE power supply;
Sound card:
The motherboard can optionally support Realtek sound card or SMICInternational BBH621 USB sound card (F_AUDIO pin is available), andthe USB sound card signal is an independent signal.
The following CPU information is for reference only
i3-10100 4core 3.6G/4.3G 65W
i3-10105 4core 3.7G/4.4G 65W
i3-10300 4core 3.7G/4.4G 65W
i3-10305 4core 3.8G/4.5G 65W
i3-10320 4core 3.8G/4.6G 65W
i3-10325 4core 3.9G/4.7G 65W
i5-10400 6core 2.9/4.3Ghz 65W
i5-10500 6core 3.1/4.5Ghz 65W
i5-10505 6core 3.2/4.6Ghz 65W
i5-10600 6core 3.3/4.8Ghz 65W
i7-10700 8core 2.9/4.8Ghz 65W
i9-10900 10core 2.8/5.2Ghz 65W
i5-11400 6core 2.6/4.4Ghz 65W
i5-11500 6core 2.7/4.6Ghz 65W
i5-11600 6core 2.8/4.8Ghz 65W
i7-11700 8core 2.5/4.9Ghz 65W
i9-11900 8core 2.5/5.2Ghz 65W
Order Information
H510 V1.0 10/11th gen LGA1200 HD MI+DP 2*SODDR4 1*LAN 2*COM3*USB2.0 3*USB 3.0 SATA MSATA M.2 SSD 12/19VDC
Power: 2*2PIN(12V/19V) or 12V/19V adaptor
I/O interface: DC_IN,2*2PIN,HDI,USB
HDI: 2*10PINUSB:
MF_USB3(USB3.0 header) or MUSB_B(USB3.0)
JUSB_1(USB2.0 header) or MUSB_A(USB2.0)
MPC_CTRL, FAN_Header, 1*MPWRBTN(Power On)
LINE_OUT,OPS_TV_CON header
OPS-LVDS card support HDI+LVDS
OPS-DP card support HDI+DP